| Quality Control Systems for Municipal & Industrial
Installations The Industry Benchmark Standard for a Quarter Century |
| Components and Accessories |
| Special Application Control Systems |
| Pump Control Panels |
| Motor Control Centers |
| Feature Products |
| Single Phase Voltage Monitor |
| Three Phase Monitor |
| Junction Boxes | Battery Alarm w/Charger | Duplex Controller | Float Regulator | Alternating Relay | Triplex Alternator | Quadraplex Alternator |
| Duplex Controller - PN 010- 120- 122P | Operation |
 |
The solid state DUPLEX controller will automatically control
and alternate any duplex system while providing the user with a visual
indication of both input and output status. Time delayed outputs, internal
latching, internal alternator, built in H- O- A switches and fail safe
operation insure reliable operation even in the event of external signal
device failures. Alternation always occurs when the lowest input device is de-activated. Extremely low power CMOS voltage levels and input switch voltages are developed internally, from 120VAC input power, to provide safe operation. Additionally, a high level alarm output is provided to activate a visual or audible alarm device. Surface Mount or Plug In models available. Input LED’s are provided to indicate float operation therefore also used to indicate a float switch failure. In the case of a failure the system will continue to operate as describe in the following chart: |
| Specifications | Features |
|
• Supply Voltage: 120VAC, 50/ 60 HZ • Power Dissipation: Less than 1 Watt • Output Rating: Pilot Duty: 15A Make 1.5A Break - 2.5A Continuous • Output Indicators: LED’s • Control Voltage: 150 Microamps @ 5VDC • Operating Temp: -20° to +60°C • Storage Temp: -45° to +85°C • Enclosure: Lexan • Surface Mount Base: Lexan • Plug In Base: Rynite |
• Solid State Circuitry Low Power Inputs • Fail Safe Operation Surge Protected Outputs • Internal Latching Time Delayed Outputs • Push To Test Internal Alternator • Dual HOA Switches Lead / Lag Select • High Level Alarm Output Input and Output Indicators • Surface Mount Base Plug In Base |
| Control Panels can be manufactured to meet the following safety requirements: | |
| • UL 913 for Hazardous Locations | • UL 508 |
| • Service Entrance Equipment | • ETL |
| Website
design by MTB
Software Solutions Inc. Copyright © 2003 Sta-Con Incorporated |