Development of a Control Panel for an HVAC Motor Control
[click to enlarge]
 Development of a Control Panel for an HVAC Motor Control STA-CON LLC is committed to exemplary customer service, safety, and constant innovation. We put these dedications to work every day. As an example, we completed an HVAC System Control Panel development project that met customer specifications, safety standards, and offered many beneficial features.
We started the project by designing the multiple motor control system which would be housed in a steel cabinet that measured 60" high x 48" wide x 16" deep. The panel included controls for a 125 HP compressor motor, 10 HP mixer circulation pumps, 3 HP cooling fans, cooling tower, and chiller circulation pumps of 25 HP and 5 HP respectively. We engineered the panel to have operator pilot devices mounted on the outer door and a terminal block for customer field connections. The system also featured a soft starter for the circulation pumps, variable frequency drives for the compressor motor, as well as ventilation fans and louvers.
The panel was tested at site voltage and all field devices and operations were simulated prior to shipment. Once we guaranteed that all standards and specifications were met, we finished the motor control panel in powder coated ANSI gray and the project was marked complete within 4 weeks.
Stacon maintained its high quality standards and our reputation for delivering dependable, reliable products. Let Stacon design and develop a control system for your specific needs.
HVAC Motor Control Panel Project Highlights
| HVAC Motor Control Panel Development Project |
Multiple motor control system for building HVAC system including compressors, mixers, fans and pumps. |
| Capabilities Applied/Processes |
Primary:
Design Engineering/Product Development
Assembly |
| Overall Part Dimensions |
Height: 60"
Width: 48"
Depth: 16" |
| Material Used |
Steel |
| Material Finish |
Powder Coated ANSI Gray |
| In process testing/inspection performed |
The panel was tested at site voltage and all field devices and operations were simulated prior to shipment. |
| Features |
Voltage: 480 VAC
Phase: 3 PH
Wires: 4 W
Motors
Compressor motor 125HP
Mixer Circulation pumps 10HP
Cooling Fans 3HP
Cooling tower circulation pump 25HP
Chiller circulation pump 5HP
Nema 12 indoor construction
Operator pilot devices mounted on outer door
Terminal block provided for customer field connections
Soft starter for circulation pumps
Variable frequency drive for compressor motor
Ventilation Fan and Louvers |
| Industry for Use |
Building Solutions HVAC Motor Control |
| Delivery/Turnaround Time |
4 weeks |
| Delivery Location |
PA |
| Standards Met |
Customer Specifications
2D CAD Drawing
UL508A |
Back to top |
407.298.5940
Print This Page